Copyright © Task Racing All Rights Reserved

Extra Light Bar 12V Battery

This 12V Battery includes a fast charger. Charges in 4-5 hours time.  Enough power in each battery for 2.6-3.0 hours run time on a 12" Light Bar, and 3.4-3.8 hours run time on a 10" Light Bar.  Specifically for use with our light bars.

Part# (
NBBATT)

This Hardwire harness is $99.00 in our store.  See our store for ordering

Amber Light Bar Lens (Heavy Dust Lens)

This lens goes on top the standard clear lens of our light bar. Lexan and strong, the amber lens will cut down significantly on higher dust situations. Simply use a little clear silicone caulk dabs to adhere the amber lens on top of the clear lens.  Easy to pop off and scrape off caulk dabs when it's ready to take off.  Excellent in race conditions.

Part# (
TR00018) for 12" Lens

Part# (TR00019) for 10" Lens

This additional lens is $20.00 in our store. A good addition for heavy dust race conditions.   See our store for ordering

***Note: Does not include clear silicone caulk

Yellow Light      Bar Lens (Light Dust/Snow Lens)

This lens replaces the standard clear lens of our helmet lights. Lexan and strong, the amber lens will cut down significantly on light dust situations. Perfect for snow as well!

Simply use a little clear silicone caulk dabs to adhere the yellow lens on top of the clear lens.  Easy to pop off and scrape off caulk dabs when it's ready to take off.. Excellent in race conditions.

Part# (
TR00020) for 12" Lens

Part# (TR00021) for 10" Lens

This additional lens is $20.00 in our store. A good addition for light dust race conditions.  See our store for ordering

***Note: Does not include clean silicone caulk

Cigarette Lighter Plug Adapter for Helmet Light and Light Bar Batteries 

This plug adapter will allow you to plug into an ATV/UTV/Snowmobile/Car/or any other system that has a 12V Cigarette plug.  Will allow you to run all night on our helmet lights and light bars!!! Essentially a hardwire option!

Part# (TR00008)

This plug adapter is $30.00 in our store. A good addition for a flexible set up.  See our store for ordering

Light Bar Accessories

TASK RACING

Wire Harness for Rechargeable Battery System with on/off handlebar switch

This wire harness is for our light bars with a rechargeable 12V battery set up . Primarily for bikes that have no stator, no e-start, and no lighting coil.  Includes  on/off switch at the handlebar for ease of use. Good for use with 12" or 10" light bars.

Part# (
TR00017)

This Hardwire harness is $25.00 in our store.  See our store for ordering

Hardwire Wire Harness to On-Board E-Start Battery with on/off handlebar switch

This wire harness is for all hardwiring of our light bars from your on-board electric-start battery direct to our light bars. Primarily for bikes that have E-Start or have enough stator power to support 35-75 watts of lighting.  Includes  on/off switch at the handlebar for ease of use. Comes with KTM OEM plugs for easy compatibility. Good for use with 12" or 10" Light bars.

Part# (TR00016)

This Hardwire harness is $35.00 in our store.  See our store for ordering